TargetMode Property
[ UP ]

 

Description

Sets or returns the target’s operating mode after reset command.

Syntax

HCS121.TargetMode [ = setting ]

Part Type Description
Setting Index Operating mode value after reset. Following are the valid constant HCS12MODES enum values:
Constant Description
h_Special_Single_Chip Special_Single_Chip operating mode
h_Emulation_Expanded_Narrow Emulation_Expanded_Narrow operating mode
h_Special_Test Special_Test operating mode
h_Emulation_Expanded_Wide Emulation_Expanded_Wide operating mode
h_Normal_Single_Chip Normal_Single_Chip operating mode
h_Normal_Expanded_Narrow Normal_Expanded_Narrow operating mode
h_Peripheral Peripheral operating mode
h_Normal_Expanded_Wide Normal_Expanded_Wide operating mode

See also:

Reset method

 

If you have a question or suggestion please contact me. Updated: 03.19.2003
Copyright (c) 2003-2004 J.Gorgas. All rights reserved. All trademarks mentioned are the property of their respective owners.