ReadByte Method
[ UP ]

 

Description

This method is used to read a single byte from a position of memory.

Syntax

Byte = HCS121.ReadByte (Addr, BDMmapped)

Part Type Description
Byte Integer 8 bit value returned.
Addr Integer 16 bit address value of the memory position to be read.
BDMmapped Boolean If it’s TRUE the BDM firmware lookup table is in map.

See also:

ReadWord method

 

If you have a question or suggestion please contact me. Updated: 07.18.2003
Copyright (c) 2003-2004 J.Gorgas. All rights reserved. All trademarks mentioned are the property of their respective owners.